|
|
Post by tanprod on Jan 19, 2008 6:10:36 GMT -5
Hello I need your help,
during the installation of the software no response of the PK. no load of scene anything. no acces in the native mode
|
|
|
|
Post by Stray on Jan 19, 2008 7:07:29 GMT -5
Hi,
I’m not sure what you mean exactly, but there shouldn’t be any activity going on with the padKontrol during installation and installation doesn’t install any scenes. Once you’ve completed the install, you’ll have a shortcut to nKReason on your desktop. Double-click on that. Once that’s loaded, you’ll be able to access native mode by pressing Scene+Pad 16.
Also, make sure to refer to the manual for info on how to set up Reason to work with nK Reason.
Let me know if that doesn’t answer your question.
Stray
|
|
|
|
Post by tanprod on Jan 19, 2008 11:24:48 GMT -5
re
after the install , i dbclick on icon. bome's translator run and close. i think that good but acces native modewith scene+ pad16 ( i have icon in taskbar)
ty
|
|
|
|
Post by Stray on Jan 19, 2008 11:45:06 GMT -5
If you’re unable to access native mode by pressing Scene+Pad 16, try the following with the padKONTROL turned on.
1. Close nKReason if it’s running.
2. Go to Program Files\nativeKONTROL Reason\Data\BMT.
3. Launch MTPlayer1.exe and check the MIDI Input and Output settings. For Input, you should have In From MIDI Yoke 2. For Output, you should have padKONTROL 1 CTRL.
4. Launch MTPlayer2.exe. For Input, you should have padKONTROL 1 PORT A. For Output, you should have Out To MIDI Yoke 1.
5. Launch MTPlayer3.exe. For Input, you should have padKONTROL 1 PORT A. For Output, you should have Out To MIDI Yoke 2.
6. Launch MTPlayer4.exe. For Input, you should have padKONTROL 1 PORT A. For Output, you should have Out To MIDI Yoke 3.
Try launching nKReason now and see if that makes any difference. Also, let me know if you had different settings in any of the MTPlayers.
Thanks.
|
|
|
|
Post by tanprod on Jan 19, 2008 15:18:32 GMT -5
I Launch MTPlayer1.exe and check For Input, i have In From MIDI Yoke 2. For Output, i check "peripherique audio usb2"
I Launch MTPlayer2.exe. For Input, i check "peripherique audio usb2"
. For Output, i check Out To MIDI Yoke 1.
I Launch MTPlayer3.exe. For Input, i check "peripherique audio usb2"
For Output, i have Out To MIDI Yoke 2.
I Launch MTPlayer4.exe. For Input, i check "peripherique audio usb2"
. For Output, i have Out To MIDI Yoke 3.
i run NKreason
error:
cannot open midi input device " peripherique audio usb 2" x4
ty
|
|
|
|
Post by Stray on Jan 19, 2008 18:25:35 GMT -5
Your padKONTROL driver isn’t installed correctly. You need to follow the instructions for installing the driver as they’re listed in the manual and then re-run nKReasonSetup.exe.
|
|
|
|
Post by tanprod on Jan 21, 2008 12:03:42 GMT -5
hello
I have some news about my problem .
I have re installed padkontrol driver , midi yoke and nKReason setup.
now i have the same pb :
cannot open midi input device " peripherique audio usb 2" x4
|
|
|
|
Post by tanprod on Jan 21, 2008 12:13:21 GMT -5
But, i have a idee
connect padkontrol with MIDI cable (din) and check the good midi input and ouput for the four MTPlayer; i run nKreason and.....
miracle that work and i have tha native acces with scene+pad 16.
coooool ( i dont know but that dont work with usb connection.)
ty for help and good job
|
|
|
|
Post by Stray on Jan 21, 2008 20:43:12 GMT -5
Good to hear that you got it working, but your pK’s driver is still not installed right. “peripherique audio usb 2” is the name of the generic Window’s driver. The pK’s ports are padKONTROL 1 PORT A/PORT B/CTRL.
|
|
|
|
Post by tanprod on Jan 23, 2008 14:34:14 GMT -5
hi
Thank you for the advice , i have make a good installation i have the 3 padkontrol ports. thank you again .
( if you make a upgrade remember me lol)
|
|
