|
|
Post by Stray on Jun 30, 2015 17:59:02 GMT -5
Not sure on that honestly, but I would imagine that it would be handled within the MCU script within Studio One.
|
|
|
|
Post by thongumabob on Jul 1, 2015 8:01:14 GMT -5
I'll give it a shot and report back
|
|
|
|
Post by sylvain on Oct 23, 2015 12:33:25 GMT -5
Hi there... Do you think it's possible to assign Play AND Stop on the unique play button of push ?
Thx a lot
|
|
|
|
Post by Stray on Oct 23, 2015 18:21:53 GMT -5
Welcome to the forum. I'm not sure on that as I'm not too familiar with Studio One. You could try playing around with the mapping for the Mackie Control play button, which you can find in MackieControl.surface.xml.
|
|
|
|
Post by sylvain on Oct 24, 2015 5:30:12 GMT -5
Hi stray  thx for your answer.... i follow what u said and i found those lines relative to that: <Control name="stopButton" type="trigger" options="receive"> <MidiMessage status="#90" address="#5D"/> </Control> <Control name="playButton" type="trigger" options="receive"> <MidiMessage status="#90" address="#5E"/> </Control> and <Control name="stopLED" options="transmit"> <MidiMessage status="#90" address="#5D"/> </Control> <Control name="playLED" options="transmit"> <MidiMessage status="#90" address="#5E"/> </Control> in fact i would like to send a play message from the play button at the first push and a stop message at the second push (with light stopping) .. but i must admit i'm unable to change any command line... if you have an idea If not, thanks a lot to have point that to me Best regards. Sylvain |
|
|
|
Post by Stray on Oct 24, 2015 6:43:57 GMT -5
Close Studio One, find the line in that file that reads:
<Command control="playButton" command.category="Transport" command.name="Start"/>
Change it to:
<Command control="playButton" command.category="Transport" command.name="Toggle Start"/>
And restart Studio One.
|
|
|
|
Post by sylvain on Oct 24, 2015 6:53:30 GMT -5
Perfect !!!!! God thanks you so much i was searching to solve it since yesterday. You're the best thanks !  )) Sylvain |
|
|
|
Post by sparkie on Aug 8, 2017 13:31:59 GMT -5
Hi Stray,
I'm trying to use MCU control in Studio One 3.5, with MCU in PXT General, on Windows 8.1. I'm having issues with the V-Pots resolution; when turning Push encoders clockwise trying to increase values the increase is in increments of 2; when rotating the encoders anticlockwise to decrease values, the decrease is in increments of 32. I also don't seem to be getting any screen feedback on the Push. My set up in Studio One is: Mackie Control Sending and receiving from PXT General 2. Any help greatly appreciated.
Regards,
sparkie
|
|
|
|
Post by Stray on Aug 8, 2017 16:04:01 GMT -5
Do you have the Fixed MCU option selected in the User Assignments Editor? If not, that would likely be the problem. Otherwise, please post a troubleshooting log from PXT-General, which you can create via the MIDI Settings Editor. Also, post a screenshot (or multiple if needed) that shows all of the settings that you're using for PXT-General and Push ports in Studio One.
|
|
|
|
Post by sparkie on Apr 11, 2018 4:44:13 GMT -5
Hi Stray,
I've recently come back to Studio One and am using PXT General with Fixed MCU. Unfortunately I am unable to access the mixer volume controls via the Push 1 encoders when in Fixed MCU. Am I missing something?
Mark
|
|
|
|
Post by Stray on Apr 11, 2018 9:33:44 GMT -5
Assign Flip to one of the buttons. Then, when you're in Pan mode, press Flip to switch to controlling volume.
|
|
|
|
Post by sparkie on Apr 11, 2018 21:27:25 GMT -5
Excellent, thanks!
|
|
|
|
Post by sparkie on Apr 27, 2018 1:48:21 GMT -5
Hello again,
I am unable to select Edit Macros from the edit screen, or the Push hardware itself. The Edit Macros button stays greyed out and unselectable. Can you please advise?
Regards,
Sparkie
|
|
|
|
Post by sparkie on Apr 27, 2018 2:53:17 GMT -5
It's cool, I didn't have Java installed.
|
|
|
|
Post by willtheweirdo on Apr 7, 2019 10:44:12 GMT -5
I bought PXT General years ago to use my Push with Studio One and I have it working as a keyboard. @stray Are some of you using your Push within S1 as a controller, with the ability to start and stop the S1 transport with Push and use the encoder knobs too? If yes, how exactly do I do that?
|
|
thx for your answer....
))